The grinder cometh

Comments

• BLrdFX

  October 2012

  Good job on those MOD's!!

  Share on Facebook
• derrilex

  March 2013

  I had to make a box to transport the grinder safely over to Straddy. A bit of a rush job at the time but since returning I've given it a sand and a wet rub with danish oil. A bit frustrating sometimes using ply as a bit of breakout always happens but putty helps here :D  Rather than having to lift the grinder in and out of the box I decided to sit the grinder on the base and lift the box on / off as it's much lighter than the grinder. The base has M8x1.25 nutserts glued into the sides and the rebate in the base is for the cord. There is no lid ( at the moment) as I don't need to pack anything on top. One day, maybe, if it's needed. Anyway, it does the job, grinder made it there and back in 1 piece. Here is a few pics. When the Danish oil dries I'll post up some more with the grinder in.

  Share on Facebook
• Brett H

  March 2013

  Geeze you're good!! A++

  Share on Facebook
• derrilex

  March 2013

  I try not to fly on the face of public opinion Brett  :rofl: :rofl: but truth be told I could have been much neater but was rushing like a madman to get it done before departing for the barge. But your kind words are appreciated.

  Share on Facebook
• derrilex

  March 2013

  Finger in a bum  :rofl:

  Share on Facebook