Ponte Vecchio Lusso Mods

Lacehim

Woohoo. Fitted. Only need a small sand with a file (bought a small triangle one from bunnings). I didn't think they where on far enough, but then realised that the tap was screwed out and the square section started a few mm further out. Doh. At least I didn't keep sanding! lol So I just put them on, screwed in the stock screw and bob's your uncle it all worked. The size is perfect, just a smidge bigger than stock but much better for grip. The lusso HW & Steam taps need a good hard turn to keep them from leaking. Just the design of the taps from what I've heard. Anyway, take a look and see what you think. Personally I love it. I think I have the only fully tricked out PV lusso with custom handles & taps in the world! 🙂 ;D 😃 8) Big thanks to AM for making it all happen. We need to find you a big pile of wood AM so that you can make more of these. They really are fantastic. PS. There are no endcaps yet, I've decided to make my own s/steel ones because the you have to drill a hole in the stock ones to get the tap off! 🙁

Koffee_Kosmo

Woo ahh Thats sexy in a mechanical way KK

SniffCoffee

My 2c says you don't need to worry about the endcaps - knobs look just fine as they are.. 😉

Muscles

Wow, good job guys! Both function and form... I seriously considered one of these machines and then saw everything you were doing to it and realised with my coffee machine "know-how" I had no hope of doing the same.

Lacehim

The machine is great just on it's own. The problem is I just have to tweak things! AM's handles and knobs just make the machine mine. It's unique now and I really love the timber. Just made the wife a chai and the knobs worked great!

Lacehim

AngerManagement wrote:

PS. All ya need is a Nakid now 😉

Well I didn't want to push my luck AM 😉 I was thinking of making one of them nakid, and leaving the other stock. HB Updated too. Also CS and I've had a few queries about where from, and how much? Where do you want them directed? Email or here? Or?

Lacehim

nice work AM. Will pop in Sunday with a knob & handle, and a grouphandle to make me a nakid. Ta.

shape_shifter

Oooo look at all that wood :o Lacehim I love what AM has done with your Lusso, it's fantastic 😃 I don't like spots or stripes but that stripey wood looks really nice. I would love to find some box elder and have ones made out of that, not sure that you can get it here though, it's a gold/yellow blending and is divine 🙂

Lacehim

Thank you AM for the amazing job you did. That nakid handle is so cool. A totally professional job. Love the handle too! It looks very nice on the lusso. I'll hopefully get a play tomorrow with the nakid and if I get any good shots I might just post up a little video here. Not sure how to post a video but I will give it ago. I've been feeling a little lost lately with my coffee, it just hasn't been making the mark for me. Maybe it's the coffee I'm using, not sure but the nakid might help extraction wise. I sure do miss my double ristretto latte's in the morning.

Koffee_Kosmo

Lacehim wrote:

Thank you AM for the amazing job you did. That nakid handle is so cool. A totally professional job. Love the handle too! It looks very nice on the lusso. I'll hopefully get a play tomorrow with the nakid and if I get any good shots I might just post up a little video here. Not sure how to post a video but I will give it ago.

With this version of YABB forum software. The only way is to post the link of your video So get to it so we can have a look KK

Lacehim

Cheers KK. So is youtube the best way to get it online?

Koffee_Kosmo

Lacehim wrote:

Cheers KK. So is youtube the best way to get it online?

Yes it seems to best KK

SniffCoffee

AngerManagement wrote:

OH and give ya wife a Kiss and say those 3 little words 😉

"Latte no sugar"???? ;D ;D

Lacehim

Got home today after a week in Ballina, NSW. Lovely holiday. Thanks for the nakid remodel AM. The slight resize stopped the problem of drips on the outside rim. Lovely job as always! I had a lovely long black with Pioneer Roastary beans, Mocha Java. Yum. I've been keeping an eye on Borat's lever and see with interest a new Antivac/Safety valve. They look like a perfect solution. They price seems high, but they seem new, so maybe they will settle down over time. Now I just need to find out the size for the Ponte Vecchio Lusso and order one. 🙂 Loving the machine at the moment. I'm going to mod the level indicator so that it's easy to read, then hopefully put the new safety valve in and it's all done. I've also had this drip from the left group since new. I replaced the seals again before my holiday but found the group had some fine scores in the wall on either side of the cylinder chamber. 🙁 Jack at Sorrentina is going to speak to Ponte Vecchio about it because I'm 99.9% sure that's what's causing the drips. Hopefully they will replace the group.

SniffCoffee

Funny you should mention scores in the cylinder wall... Like you I replaced my seals with Jack's toolkit, all was well for a few weeks, then, hello again, I was getting water shooting out of the top of the right group again when I pulled the lever down. So, when the toolkit arrived again (this time from you Lacehim!) I took out the piston, seals were fine but turning the machine over and looking into the cylinder revealed two scratches on the cylinder wall. I think what is happening is that the lube I put on the seals keeps the leak under control until the lube wears off a bit, then water starts leaking through. Like you I'm hoping Jack can organise a replacement group for me too. Sniff

Lacehim

Sniff, do you have any photos? Here's mine. drips either side of the cylinder As you are looking at the group the marks are on the left and right of the group. They aren't that deep, but seem to be deep enough that a drip appears in exactly the same spot as the marks on the cylinder wall. Jack mentioned Autosol might rub it flat again becuase the brass is fairly soft, but it's leaked like this from new, so would prefer to discuss the matter with the manufacturer, rather than trying something like that. He also mentioned that I could get the cylinder coated in technical chrome. He didn't mention how much that would cost. I also didn't want to jump into modifying it in this way because I was concerned about a) not having the machine working for a while b) would exisiting seals still work once chromed c) $$$ I hope Ponte Vecchio replace the group under warrenty.

Koffee_Kosmo

That looks more like a crack in the photo but I you have the benefit of seeing the real thing KK

SniffCoffee

No, I didnt' take photos but the scratch is similar, on mine it's just as long but has a twin running parallel with it. Jack mentioned the autosol issue with me to, and the chroming idea, but like you I'd rather have a new group. Sniff

Brett_H

Wow... Look at those scores Lacehim. Id be pushing really hard for a new group because then last thing you want is to have your machine out of service with "experimental" fixes. Jack is obviously a thoughtful and passionate retailer given that he hasn't fobbed you off and has in fact offered several solutions. This augers well for a great outcome.

Koffee_Kosmo

If they are fine scores they can be easily fixed Cylinder honing is a technique used in the automotive industry for brake and motor block cylinders Another way to look at what honing is ? Its another form of polishing metal One can be purchased from super cheap and used with a hand drill KK

« Previous Page Next Page »