Classified - Members WTB, For Sale or Free to a Good Home. — Coffee Forum

Free to good home: Sunbeam EM6910

Howie Hua — Tue, 23 Mar 2021 00:53:38 +0000

The EM6910 has served me well. Giving away due to receiving new machine for bday gift.
Still works well, just requires a good descale and clean.
Pickup St Johns Park NSW

[SOLD] Londinium LR for sale - Sydney

Kelsey — Fri, 13 Mar 2020 09:28:36 +0000

My beloved LR is leaving home, with a new machine now on the bench.
Great condition, usual wear and tear that boils down to light scuffing of the chrome.
Asking price is $3250, negotiable.
Pick up from Rozelle, Sydney... But, coincidentally, I now have a box and packaging that should fit this machine fairly exactly were it to require shipping at buyer's expense.

Manual Espresso Gear & ACF Espresso Cups

ash — Sat, 30 Dec 2017 12:34:41 +0000

Hi all,

I'm selling some of my manual espresso gear and 12 ACF Tulip espresso cups as I'm no longer using them.

There are 12 ACF Tulip espresso cups and matching saucers, $100 for all 12 cups and saucers or $55 for a box of 6 cups and saucers, plus p&h.

The Presso branded manual espresso maker is $100, includes everything in the photo, plus p&h.

The Portaspresso system includes a Rosco handgrinder, Rossa espresso machine, naked portafilter, standard portafilter, stand and tamper, all for $600 plus p&h.

WTS (melbs) Mazzer Mini short hopper

_maatt_ — Thu, 29 Mar 2018 12:16:34 +0000

Actually 2 up for grabs. Lids included.

Deets here, though if you're reading this post you probably know what you're looking at... Mazzer Mini Short Hopper - DiBartoli

One is brand new and perfect. $50 firm for that one.

The second arrived with a superficial crack as per photos, and has been filled a couple of times though still in otherwise new condition. I'll take $40 or consider reasonable offers for that one.

Plus postage if required - alternatively pick up from Abbotsford or can arrange to meet in the Melbourne cbd.

WTS (melbs) Mazzer Kony-E in impeccable condition

_maatt_ — Thu, 29 Mar 2018 12:08:09 +0000

I purchased this grinder second hand about 12 months ago as a second grinder for single origins. Although it's a terrific grinder I only used it a few times and don't have space in the new kitchen for two grinders.

Quoting the original description below - it's had less than a kilo through it since I've had it and really is in exceptional condition.

Asking $1250, pick up from Abbotsford

Note that I also have a genuine Mazzer mini short hopper listed separately - this can be easily adapted to fit the Kony reducing height significantly.

Excellent condition Mazzer Kony E for sale. This has been my daily grinder for the past twelve months after selling my Elektra Nino. Recently purchased an Anfim Super Caimano and have decided to pass the Mazzer Kony E on to someone who will appreciate it.

Beautiful grinder. Excellent condition as per photos. Burr chamber vacuumed and brushed out every week. Burr carrier removed and a thorough clean of the burr chamber and greasing of the threads carried out every 2 months.

For Sale: Compak E10 Conic OD

Kelsey — Mon, 20 Nov 2017 08:54:43 +0000

Hi all,

I'll soon be moving on the trusty Compak E10 Conic OD that's graced my bench since 2014. It's had 51KG of beans through it in that time, so barely broken in. :coffee2:

My new grinder should be arriving sometime in the next week or so, and I'd like to shift this on shortly thereafter due to limited bench & storage space in Sydney. Unless I can convince my wife we need a separate grinder for her milky coffees :rofl:

It's a hell of a grinder - could easily be put to work in a cafe instead of a home, but we all know that.

Specs here: http://www.compak.es/en/e10-conic-essential-od.php

Will post photos once I've cleaned it up for sale.

WTB : gicar autofill controller for quickmill Anita

Spin addict — Sun, 29 Oct 2017 14:30:20 +0000

As the title suggests I’m looking for a gicar autofill controller to suit a quickmill Anita.

The current unit looks to have blown the transformer. I have found a replacement transformer but there may be more wrong than just that so as a backup, a new or used unit is needed.

Looking to pay less than 100 dollars posted to wa.

Cheers
Stef

Sent from my iPad using Tapatalk

EOI BNZ-MD74 Big Boy Conical Grinder + plus new set of burrs

Koffee_Kosmo — Wed, 27 Sep 2017 17:22:12 +0000

This post is for Expressions Of Interest
Available in approx 2 weeks

Item - Grinder ( Big Boy Conical )
Brand and model - BNZ MD74
Condition 8.5 / 10

Extras - A set of new burrs (cost $200)

PRICE - $850.00 ONO
Plus shipping approx $60 (But free delivery in Brisbane)

- Replacement cost $2800 plus $200 for burrs

This grinder is equal to a Robur. But with a smaller footprint and height - Making it ideal for space challenged kitchens
Preferred and used by many barista champions

The grinder has had the Mercedes Benz treatment in my home and the current burrs have a fair bit of life in them

The commercial fill stop flap and the fill gauge has been removed from inside the doser and put aside
Now very easy for coffee to drop and sweep chute clean
NOTE - Can refit if desired but it’s not relevant in a home coffee station setup

PM me if you interested in a magic big boy conical grinder

KK

Macap M4D Chrome

InspectorGadget — Tue, 26 Sep 2017 00:15:46 +0000

It is a year old. Perfect condition and Chrome.

I bought it from Paul at K Bean.

I want $750 as it is pretty well a brand new machine.

I am in Woodvale Perth.

Grant

WTB Rosco Hand Grinder

DrD — Thu, 07 Sep 2017 21:44:14 +0000

Hi everyone

I know it may be a long shot ... but if anyone has a Rosco hand grinder that is gathering dust and would like to sell, please get in touch with me. Have recently acquired a Rossa HC and would love to pair it with a Rosco grinder.

Thanks, Dan

[SOLD] LONDINIUM I for sale, Sydney

Kelsey — Fri, 13 Jan 2017 13:04:53 +0000

Hi All,

With the release of the LONDINIUM R, I have a new machine winging it's way to me so it's time to move on my L1.

It's a second generation machine with the white pressure gauge and all handles/toggles solid wenge wood. Fantastic machine and in great shape - I'll post pics shortly, but only the drip has any significant scratches/scuffing, as is to be expected.

Purchased in early 2014/late 2013 it's been in daily operation ever since and has been maintained lovingly. Seals changed regularly. December 2016 the original pump was replaced with an updated vibe pump for speedier tank fill and the braided pressure hose replaced. It now has the new londinium custom seals installed that fixes an issue with slipping across all machines with this group. It comes with a naked PF also with wenge wood handles.

These retailed at £1650. With shipping & customs the landed cost is currently about $3300 AUD.

I'm looking for $2400 ONO, pick up only from Sydney.

Attached shots are older - will supply new ones if there's any interest.

Specs are here: https://londiniumespresso.com/specs - the difference between the LI and LR is the LI has a vibe pump rather than a rotary and an open thermosiphon.

Ideally I'd hold onto it until the new one arrives in the next couple of weeks.

PM or email me on coffee@thinksync.com.au.

3 Group Commercial Coffee Machine for Sale - Iberital, European Designed

Steve_01 — Thu, 23 Jun 2016 21:02:32 +0000

3 Group Commercial Coffee Machine

Brand name: Iberital

Spanish by design. Made in Europe.

Very strong machine.

Huge 20 litre boiler.

Perfect working condition.

Absolutely nothing wrong with it. Heats, steams, dispenses coffee and water, no problems, no leaks.

100% fully functional and ready to rock and roll.

Machine is fully programmable.

Comes with 2 group handles (1 single and 1 double) Extra one can be purchased if required.

Also Included; 1 inlet hose and 1 drain hose.

Bankstown area. 0450 476 557

Price $1100

930mm x 560mm x 525mm

PLAIN COFFEE BAGS AND CLEAR PLASTIC STAND ALONE BAGS FOR SALE

Steve_01 — Thu, 23 Jun 2016 21:16:15 +0000

I have 1000 x 1kg plain silver coffee bags, completely unused. Brand new and still in the box.

These bags have valves and will easily pack and seal 1kg of roasted coffee for sale.

Dimensions roughly 135mm across, 405mm tall.

Bankstown area. 0450 476 557

Cash on pick up preferred. Credit cards accepted.

I have 1000 x 70 gram plain silver sample coffee bags, Brand new, resealable and still in the box.

These bags were bought for, and will easily pack and seal 70 grams of roasted coffee.

They are sample bags.

Dimensions roughly 165mm tall, 110mm across.

Cash on pick up is preferred.

Bankstown / Greenacre area. 0450 476 557

I have 2000 x 600 gram clear plastic bags with seal, completely unused. Brand new, resealable and still in the box

These bags were bought for, and will easily pack and seal 600 grams of chai tea or other foodstuffs.

Dimensions roughly 145mm across, 225mm tall.

Bankstown area. 0450 476 557

Cash on pick up preferred. Credit cards accepted.

green bean coffee and accessories

Steve_01 — Mon, 25 Apr 2016 17:26:42 +0000

Selling off a few things not needed in the workshop. Bankstown area.
Can do cheap / bargain price on these items for sale.
Plain silver 1kg coffee bags x 1000 with air valves. $200 for 1000 bags
Plain silver 70 gram sample coffee bags with air valves x 1000. $150 for 1000 bags
600 gram clear plastic bags with seals x 2000. $220 for 2000 bags
Unopened 69kg bag of green bean coffee, Guatemala Los Volcanos, very cheap price. But very good coffee.
And good price on a 3 group, 20 litre European made commercial coffee machine in near new condition. Perfect working condition. $1300

0450 476 557

WTB: Caravel

GeekKopi — Sun, 31 May 2015 23:23:24 +0000

As the title suggest I'm after a vintage caravel and hoping to source locally. Not too fussed about the colour preference (but grey is preferred due to build quality from what I have read). I think it will cater to my black soul drinking habits nicely and add a touch of class to my coffee bar.

I've been searching for a while and I know I can get one from Italy but I'd rather get one from Australia that has been restored or in good working order that I can polish up myself.

If you happen to come across one please let me know.

Kevo's Bezzera Strega Lever

Kevohere — Thu, 19 Nov 2015 11:48:17 +0000

Bezzera Strega Lever.

Purchased new in June 2013 from Austins Crema at Broadmeadow, Newcastle via Bezzera QLD.
Great condition with minor scuff marks on the drip tray.
Currently fitted with an IMS shower screen purchased at MICE this year, but still have the original.
One group has the double spout (it can be swapped to a single) as the supplied single spout group was machined naked.
All the usual accessories that were supplied in the box are available including the multi-lingual manual and the invaluable plastic tamper and spoon! I can also pitch in a couple of SS milk pitchers if desired.
Cup warmer has always had a latex type non-slip mat in place, so no scuffing there.

Somebody is bound to ask, so I’ll attempt to answer the “why are you selling?” now.
Basically I have been tempted (for the want of a better word) by the LM GS3. :P
Mainly, as some other lever owners have declared in the forums, my (height challenged) partner has struggled with its use. So in an effort to maintain peace and harmony in the house and to assist me in overcoming the loss of this fantastic machine, it’s being sold……. for a GS3.

ALSO: Selling a Mazzer Mini and Breville BCG800 Smart Grinder. (recouping more funds :P)

Mazzer was purchased from Di Bartoli in December 2011 but virtually had no use for the last 18 months or so, as I have been using a large BNZ with the Strega. Finger guard and tamper removed but still have them with the manual.
BCG800 is about 5 or 6 years old but only used for 1 plunger brew 5 days a week for 44 wks/yr over the last 4 years.
Both grinders work faultlessly, other than the BCG800’s ‘Start/Cancel button that has come loose and I just can’t permanently fit it back in. Stays in and works fine on the bench and only comes out when tipped over.
Mazzer: Asking $390
Breville: Asking $90.

Classified Members WTB,For Sale

bcspark — Mon, 28 Dec 2015 09:48:01 +0000

3in1 Bruer in original packing opened but not used $70 pick up Logan ,Rochedale South.Reason for sale too old to begin using new equipment.

FS - Assorted Coffee Gear

galumay — Wed, 04 Nov 2015 23:05:11 +0000

I have a couple of Lido hand grinders and a rare La Sorrentina stove top for sale, will be added a few other odds and sods, Faema babies and probably a couple of Caravels as I continue my spring clean and simplification project!

gear is up on my website, Arnhem Coffee

Kevo's Bezzera Strega Lever NFS

mycuppa — Thu, 19 Nov 2015 13:18:15 +0000

As a GS3 owner, I can't see what all the fuss is about - IMO there are many comparable or superior options for better value.

The hype on these machines is absurd and subsequently so is the asking price.

Don't have time to run through a list of reasons why (and I need many fingers to count)......but take it from me as an owner of various machines, my GS3 would have to be the biggest disappointment to date. Even my Expobar Minore IV at home offers me far more joy.

Good luck with the sale of your Bezzera though and if you have your heart set on a GS3 for very personal or individual reasons that are important and/or valuable to you. then go for it.....

NO LONGER FOR SALE:Londinium 1 Lever, Tank or Plumbed, Melbourne

DMH — Sat, 29 Aug 2015 20:08:04 +0000

FOR SALE L1 Series 1 Melbourne, Australia

I 've just ordered an L1-P so my Series 1 L-1 is now for sale.

Orginally supplied with tank and pump it was later upgraded to plumbed in. All parts are included and I have both the solid and hatch top covers so that new owner has the option of either tank or plumbed operation. Steam arm is on the left when facing the machine.

The machine was originally equipped with the plastic handles however these were upgraded with Londinium wenge as soon as they became available.

The machine has been great and it would't be going if the L1-P didn't exist.

Seals and screen last changed in April 2015 and I also upgraded the steam arm and nozzle to the latest design at this time.

Asking 3K AUD and would prefer a local sale as I do not have the original packaging. I can ship but would insist of professional crating and this would likely cost a couple of hundred dollars.

Machine is in great condition buts it's not new. Usual wear from 2 to 4 coffees a day over the last 2 years.

Bezzera two group B2000,information needed,please...one and all.

mulquemi — Sun, 11 Oct 2015 10:47:54 +0000

Dear Lovers of coffee and coffee making processes,
I'm in the progress of setting up another Bezzera coffee machine is our staff room at my work (school),things have gone well with a single group Bezzera and I also have a Boeme single group set up as well together with a small Saeco auto (for people who can't be bothered with the coffee handling.)
This latest Bezzera two group unit was acquired from the big E (online),at less the $100,which was fine,no group handles though I have them now.
The problem is upon inspection for confirmation everything was good to go (before connection & energising)I noticed there was no water level controller!!!! What a bugger,well obviously was a problem for it's previous owner and the machines been made redundant and not bothered with (not sure why as they are great Italian engineering).
This leads me to the point of my posting,I need another controller and I can't justify a $300 replacement controller,just hoping some kind person has a functional /second hand unit laying about in the box of bits & pieces I could have ?
Happy to pay a reasonable postage cost + something for your efforts.
The Beoma will leave to it's owner soon and I wish to have the two operational Bezzera's and the small Saeco do the coffee thing for all our lovely and dedicated staff deserve.
What do you think ,do I have any hope "or am I dreaming".
Cheers,
Mick.
\

[img][/img]

wanted'more coffee machines.

mulquemi — Sat, 15 Aug 2015 08:29:41 +0000

Dear Coffee lovers,
I'm back in a position that requires parts etc from either of these machines (Sunbeam-EM6910/gaggia-Classic).
I can offer payment of postage/packaging expenses,so probably $40-$50 each.
Our local and nearby recycling centres have been cleared out of their stocks by yours truly!
As expected I would prefer machines complete with all the standard equipment and accessories etc.
Please rack your collective brains and find me some,most appreciated and in anticipation!
Cheers,
Mick.

SOLD : Arrarex caravel V1 & La peppina .

Naki^chap — Thu, 28 Nov 2013 23:27:27 +0000

I have my two levers for sale,
These were both in immaculate condition when I purchased them,I stripped, cleaned, replaced the seals and lubed them,
I have owned these for approx, 2yrs,
Both in immaculate working condition,

Arrarex $650
La peppina $550

FGH: Old school darkroom timer for grinder

kofekitt — Sun, 10 May 2015 14:37:48 +0000

Free to a good home; i recently sold my doser grinder, i still have the darkroom timer i used with it. Basically you plug your grinder into the timer, then plug the timer into wall socket. When you press the big red button, the grinder will run for the time selected . Its old school eastern block build style . Very consistent and cuts down on waste when using a doser grinder

Free to a good home in Sydney if you pick up, or can post at buyers expense.

Photo shows grinder and timer, this ad is for the timer only

SOLD F.S Fiorenzato F6 Grinder (Sydney) SOLD

kofekitt — Sun, 19 Apr 2015 16:50:43 +0000

Hi all, i have a Fiorenzato F6 grinderfor sale , its a big beast, with 83mm burrs . Its in good overall condition, i've just bought a big doserless grinder, so moving this on. I have the hopper, but i used it with the cut down plastic hopper and clip on lid. I'll also include a darkroom timer i used it with to get consistent single dosing. All you have to do is press the red button on the timer, and also flick the grinder switch on, and it'll grind for the time its set to. Or you can just plug it in and run it as a standard grinder.
I have also removed the Auto function and flap from under the doser lid, to enable sweeping out the chute after grinding. Doser functions well, nice clean sweep and smooth function. One of the best i've used . Burr condition is good, i checked them when i bought it and still plenty of life left. Grinder body has a few small paint chips near the base. Happy to have it viewed before sale in Chatswood.

Prefer local sale as its a big heavy beast, i can also fit new burrs at cost for new buyer if they'd prefer that option

Price is $200

F.S: Elektra Semi-automatica (SYD)

kofekitt — Mon, 02 Mar 2015 11:23:19 +0000

I have an Elektra Semi-automatica for sale, as it doesn't get used often enough. It's a beautiful machine and in very good condition. Just had a new pump and a service. The exterior is in VERY good condition, the UNDERSIDE of the base has had some surface rust, i completely stripped the machine and treated the rust with an anti-rust paint. The top of the base in very good condition. It comes with one genuine Elektra double p/f, i can throw in a good 58mm tamper if needed.
It is located in Sydney, reluctant to post, but would do so and pack well at buyers request. I can also get insurance if requested by the buyer. I work at a coffee machine place, and just see too many damaged postal machines, so would prefer local sale to avoid disappointment.

Price is $800 as is, or as another option i can get a new base fitted if requested for an additional $400

Wanted,Gaggia classic parts

mulquemi — Tue, 17 Mar 2015 13:57:22 +0000

Dear Coffee Lovers,
Just trying to source Gaggia Classic parts,used and not new condition.
Need plastic drip tray ,drip tray grill,steam outlet assembly,boiler,switch etc...whatever other parts you may have available,postage to 3690 plus what do you would like for them!
Cheers,
Mick

FS: Corretto set up - South Logan

bcspark — Mon, 23 Mar 2015 10:09:03 +0000

Have decided to sell my corretto set up ,Breville BM modded to run continually with specially made SS paddle with cord switch HG stand fully adjustible ,drilled for CS K type probe. With this w. ill be a Steinel HG2310LCD industrial heat gun. This setup will comfortably roast 350g to 1kg. Looking to sell for $150.00 pick up only as would be too hard to package without dimantlig HG stand. Location,Rochedale South Logan 4123

WTB , for postage cost Plus something for your efforts!

mulquemi — Tue, 24 Feb 2015 10:41:52 +0000

Dear coffee lovers,
I have my gaggia classic all ready except for one part,the drip tray,all other wanted parts would be good to complete another partial assembled classic.
I have a person who has interest but cannot take it until I provide a drip tray,surely someone has a tray available!
cheers,
Mick.

FGH: Sunbeam 6900/6910 group handle

Lacehim — Wed, 21 Jan 2015 14:59:59 +0000

I was given a busted old Sunbeam to look at but it wasn't worth repairing.

The group handle was kept though, and if you want it you can have it. Pickup Sunshine Coast or happy to post if required.

NOTE: The group handle is only suitable if you want to make a nakid. The previous owner drilled holes in the base in an attempt to make a nakid BUT didn't realise that it was hard stainless steel not brass so 3 holes in they gave up! lol.